KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
28
In order to close the plastic boot, it is necessary to do the following:
Smoothly, without jerks, pull the boot by the belt
downwards. At the initial moment of movement an
additional resistance can arise, which is causes by
the design of gas shock absorber (built-in
damper).
During
lowering
the
belt
will
automatically be rewinding to the very closing.
Having lowered the boot to the chest level, it is
necessary to re-catch the knob and perform
closing of the boot until the lock operates.
Safety measures
In order to observe safety measures with regard to
prevention of spontaneous closing of the boot, a
stop is provided in the boot construction located
parallel to the left gas spring in the direction of
tractor travel.
In order to bring the stop into the fixed position, it
is necessary to open the boot, take off the spring
splint locking pin from the lower part of the stop
and install the splint pin into a special hole in the
upper part of the stop. Release the blocking in the
reverse sequence.
