KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
127
Position No.
in lubrication
(filling)
diagram,
Fig.32
Description of
lubrication points
Description of grade and designation of standard for
lubricants and fluids
Number of
lubrication
points and their
capacity
Frequency of change of
lubricants (engine hours,
maintenance type)
Note
lubrication and filling during operation
lubrication
during storage
temperature
from minus
40°С to +5°С
from +5°С to +40°С
main
lubricants
substitutes
being used
Substitutes:
Solidols according to GOST 1033 and
GOST 4366
250
Frame horizontal hinge Loctite 8103
Substitutes:
Main lubricant
being used
1 by 2.8 l each
in dismantling the block
Lubricant No.158 TU 38.101.320-77
Main lubricant
being used
in dismantling the block
Brake lever
Litol-24 lubricant GOST 21150
Main lubricant
being used
4
in dismantling the block
Substitutes:
Lubricant No.158 TU 38.101.320-77
Main lubricant
being used
in dismantling the block
10a
Bearings of
intermediate support
Litol-24 lubricant GOST 21150
Main lubricant
being used
2 by 0.3 l each
once in every 250 engine hours
Substitutes:
Lubricant No.158 TU 38.101.320-77
Main lubricant
being used
Cardan shaft
crosspiece bearings
Litol-24 lubricant GOST 21150
Main lubricant
being used
8 by 0.15 l each
according to maintenance
Substitutes:
Lubricant No.158 TU 38.101.320-77
Main lubricant
being used
Slotted connections of
cardan shafts
Litol-24 lubricant GOST 21150 Substitutes:
Main lubricant
being used
in dismantling the block
Perform the change of
lubricant in the cardan
shaft of driving axles
once in every 4,000
engine hours
