Section E Ganging up Belarus – 90/92 Operating Manual
50
Front ballast weights (1)
When operating with heavy mounted
machines and implements, to maintain
normal tractor controllability under
noticeable unloading of the front axle,
install additional ballast weights (1) (10
pieces of 20 kg each). Ballast weights (1)
are installed on special bracket (2), which
is fastened to the front tractor beam and
tied up with string (4) and nut (3).
Mechanism for hitch retention in
transport position
a)
Lift the hitch attachment into
uppermost position by putting
distributor handle into “lift” position
The stop (10) of hydromechanical valve
of hydraulic cylinder must be located in
extreme rear position on the hydraulic
cylinder rod;
b) Lower a handle (13), and retention
mechanism together with it, into
bottom position;
c)
Set the distributor handle into
“floating” position. Pivoted lever (12)
will turn under the effect of mounted
implement, and a tooth should come
into contact with a grip (1).
To unlock the hitch attachment act as
follows:
a)
lift up the hitch attachment into
uppermost position by putting
distributor handle into “lift” position;
b) lift up the handle (13) into uppermost
position.
Hitch retention mechanism of tractor with small-
size cabin:
1 — grip; 2, 3 — linkages; 4 — hydraulic cylinder bracket;
5 — axle; 6, 7 — levers; 8 — bracket; 9 — spring; 10 —
stop; 11 — control linkage: 12 — pivoted lever; 13 —
control handle.
https://tractormanualz.com/
