Section D. Operation Instruction Belarus – 90/92 Operation Manual
37
Engine starting
Starting at standard
conditions:
Check the level of oil in the
sump of the engine, and
cooling liquid in the radiator,
presence of fuel in the tank.
IMPORTANT! Never start the
engine with uncharged
cooling system!
IMPORTANT! You should do start of the
engine and gauges control operations only
seating in the operator seat.
WARNING: Never work on the tractor in
closed rooms.
1. Brake the tractor with parking-brake;
2. Put the lever for switching the gears
into neutral position, and the lever of
reducing gear into extreme position
(rear or front);
3. PTO should be switched off;
4. Switch on battery disconnect switch;
5. Put the lever of fuel supply into mid
position;
6. Depress clutch pedal;
7. Turn the key of the starter switch into
position II («Start») and hold it till
the engine start but no longer than
15 sec. If the engine does not start
restarting should be done not earlier
than after 30...40 sec.
8.
Release the clutch pedal. After
starting the engine check the
operation of all indication lamps and
instrument readings (temperature of
the cooling liquid, oil pressure in the
engine, battery charge).
9. Let the engine work at 1000 rpm till
stabilizing of oil pressure in the
operating range.
https://tractormanualz.com/
