Section C. Controls and Instruments Belarus – 90/92 Operating manual
32
Front driving axle control
Lever of control (1) has three fixed
positions:
• «Front driving axle is switched off»
— extreme bottom position. Use on
transport at movement on roads with
firm covering;
• «Front driving axle is included
compulsorily» is an extreme top
position. Use this mode short-term for
work on friable and damp soils and if
necessary at movement by reverse.
• «Front driving axle is included (is
switched off) automatically» is a middle
position. Automatic inclusion of and
switching off of front driving axle is
carried out in this mode by means of
overrunning clutch depending on
slipping of rear wheels. Use this
mode at various fields’ works.
ATTENTION! At tractor use without
crankshafts install lever control (1) in
extreme top position («Front driving
axle is included compulsorily»).
https://tractormanualz.com/
