Section C. Controls and Instruments Belarus – 90/92 Operating manual
34
Compressor control
Handle has two positions:
• «Compressor is included» — at turn
of handle in such position that hand
on handle should be directed back
on course of tractor;
• «Compressor is included» — at turn
of handle to 180 degrees in such
position, that hand on handle should
be directed on course of tractor.
• Valve 1 is screwed in compressor, and
it is intended for air selection of air for
tires pumping, and also for another
purposes, where energy of
compressed air is required.
Steering wheel position change
For change of height position of wheel
steering:
• Remove cover (2);
• Unscrew clip (1) on 3...5 turns;
• Move wheel in demanded position;
• Tighten clip (1) by effort of had and
install cover into its place (2).
NOTE: Range of height adjustment of
steering wheel is equal to 100 mm.
Steering column can bend in four various
positions from 25° to 40° with interval in
5°. For inclination of steering column pull
the handle of clamp (3) upwards.
https://tractormanualz.com/
