Section E Ganging up Belarus – 90/92 Operating Manual
45
Machines (implements) can be mounted
on the tractor also by means of automatic
hitch SA-1, connected to the tractor hitch
attachments in three points (two rear joints
of lift links and rear joint of top link).
To prevent accidental spontaneous de-
coupling of the machine from the tractor,
secure the automatic hitch latch with
spring cotter-pin.
Limit (telescopic) ties (1)
Ties are used for limiting side sway of the
lift links of hitch attachment both in
transport and operational positions. It is of
particular importance when operating on
slopes, close to excavations, walls, etc.
Rear end of the tie is coupled to lift link,
and the front end to the bracket in one of
four positions depending on operation
type:
• Position 1. Ties exclude side sway of an
implement in transport position.
• Position 2. Ties exclude side sway of an
implement both in transport and
operational positions.
IMPORTANT! Positions 3 and 4 should
be used only when lift links installed on
additional suspension axes (upper axes)
• Position 3. Ties exclude side sway of an
implement in transport position.
• Position 4. Ties exclude side sway of an
implement both in transport and
operational positions.
ATTENTION! Ties should be installed
only in the second lowest holes of
brackets (position 2) to avoid tie
breakage.
https://tractormanualz.com/
