Section E Ganging up Belarus – 90/92 Operating Manual
43
To increase road clearance when tilling
high-stalk plants install front ends of lift
links on auxiliary suspension axes,
placed 110 mm above the axis of lift
links. To follow field profile in lateral
direction when operating wide-cut
implements, connect braces (1) to lift
links (2) by means of long slots.
IMPORTANT! Slots of brace yoke
should be behind the hole to avoid
brace damage.
Top link and braces
Length of top link is adjusted within the
range of 500...740mm. Length of right-
hand adjustable brace can be adjusted
within the range of 425...520 mm by
rotating a handle (1). As dispatched
from the works the length of the right-
hand brace is set to standard value of
475 mm. Length of left-hand (non-
adjustable) brace (4), when tractor is
dispatched from the works, is also set to
standard value of 475mm.
During the operational process the change
of front brace length is provided within the
range of 395...510 mm depending on
tractor configuration and type of ganged-
up machines and implements.
IMPORTANT! Use only right-hand
brace to adjust an implement in
transverse plane.
Depending on tilling depth and soil
nature, set top link in one of three
positions:
I —light soil and shallow tilling depth
when using draft control;
II —average soil and average tilling
depth when using draft control;
III — heavy soils in case of deep tilling, as
well as when using position control and
without use of draft control.
425-520
https://tractormanualz.com/
