MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Page: 99 / 208

Task Description 95
6.3 Crankcase Ventilation
6.3.1 Crankcase breather – Wire mesh cleaning
Material
Designation / Use Part No. Qty.
Cleaner
Diesel fuel
Petroleum jelly
Spare parts
Designation / Use Part No. Qty.
Sealing ring
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid naked flames, electrical sparks and ignition sources.
• Do not smoke.
WARNING
Compressed air.
Risk of injury!
• Do not direct compressed-air jet at persons.
• Wear protective goggles / safety mask and ear protectors.
CAUTION
Excessive reaction time of cleaning agents on components.
Damage to component!
• Observe manufacturer’s instructions.
• Wear protective clothing, gloves, and goggles / safety mask.
Crankcase breather – Wire mesh cleaning
1. Remove hose.
2. Loosen clamp (5).
3. Remove oil separator cover (7).
4. Remove individual parts from oil separator
cover (7).
5. Wash filter element (wire mesh) (3) with diesel fuel.
6. Blow out filter element (wire mesh) (3) with
compressed air.
7. Clean residual parts with cleaner.
8. Remove cleaner.
9. Coat sealing ring (6) with petroleum jelly and insert
in groove in the oil separator cover (7).
10. Insert both holders (2, 4) and filter element (wire
mesh) (3) into the oil separator cover (7), ensuring
correct installation sequence.
11. Install oil separator cover (7) with clamp (5) on
cylinder head cover (1).
12. Install hose, ensuring that it is not subjected to
tension.
MS15009/00E 06-09 © MTU