MTU Detroit Diesel 12 V 2000 P62 Technical Publication Download Page 159

Page: 159 / 208

Task Description

155

5. Disconnect grounding strip from ECU grounding

pin (7).

6. If the screws (4) are easily accessible:

6.1. Remove screws (4).
6.2. Take off ECU housing (3) from mounting

brackets (2).

6.3. Unscrew mounting brackets (2), cable shock

absorbers (5) and further securing parts (6)
as one unit from engine.

7. If the screws (4) are not easily accessible:

7.1. Remove screws (1).
7.2. Take off ECU housing (3) together with

mounting brackets (2).

7.3. Unscrew cable shock absorbers (5) and

further securing parts (6) as one unit from

engine.

ECU – Installation

1. For installation follow reverse sequence of working steps. Ensure that connectors are plugged in the correct

socket.

2. Use connector pliers to turn the bayonet union nuts of the connectors clockwise until they lock into place.

MS15009/00E 06-09

Summary of Contents for Detroit Diesel 12 V 2000 P62

















































































































































































































Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands

MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands