MTU Detroit Diesel 12 V 2000 P62 Technical Publication Download Page 100

Page: 100 / 208

Task Description

6.3.2

Crankcase breather – Oil separator replacement, diaphragm
check and replacement

Preconditions

• Engine is stopped and starting disabled.

Special tools

Designation / Use

Part No.

Qty.

Torque wrench 6-50 Nm

F30027336

Ratchet adapter

F30027340

Spare parts

Designation / Use

Part No.

Qty.

Filter element
Diaphragm
O-ring

WARNING

Hot oil.

Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.

• Avoid contact with skin.
• Do not inhale oil vapor.

Replacing filter element of oil separator

1. Remove cover (2) with O-ring (3).
2. Remove filter element (1) from housing (4).
3. Insert new filter element into housing (4) ensuring

correct installation position, and fit cover (2)

with new O-ring.

4. Tighten screws of cover (2) to specified tightening

torque of 6 Nm + 2 Nm.

5. Replace filter elements of further oil separators in

the same way.

MS15009/00E 06-09

Summary of Contents for Detroit Diesel 12 V 2000 P62

















































































































































































































Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands

MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands