MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Page: 117 / 208

Task Description 113
A Both filters cut in (operating position)
B Left filter cut out
C Right filter cut out
Fuel filter replacement with the engine stopped
1. Stop engine ( → Page 54) and disable engine start.
2. Cut out the filter to be replaced.
3. Remove cut-out easy-change filter using the
filter wrench.
4. Clean the sealing surface of the filter head.
5. Check sealing ring of the new easy-change filter
and coat it with fuel.
6. Install and tighten new filter by hand.
7. Set three-way cock to operating position (both
filters cut in).
8. Replace further fuel filters in the same way.
9. Vent fuel system.
Fuel filter replacement with the engine running
1. Cut out the filter to be replaced.
2. Open vent plug of the cut-out filter and make
sure that the pressure is completely released
from the filter.
3. Close vent plugs.
4. Remove cut-out easy-change filter using the
filter wrench.
5. Clean the sealing surface of the filter head.
6. Check sealing ring of the new easy-change filter
and coat it with fuel.
7. Install and tighten new filter by hand.
8. Set three-way cock to operating position (both
filters cut in).
9. Replace further fuel filters in the same way.
MS15009/00E 06-09 © MTU