MTU Detroit Diesel 12 V 2000 P62 Technical Publication Download Page 94

Page: 94 / 208

Task Description

6.1.2

Engine – Barring with starting system

Special tools

Designation / Use

Part No.

Qty.

Connector pliers

0135315483

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury - danger to life!

• Before barring or starting the engine, ensure that nobody is in the danger zone.

• After working on the engine, check that all protective devices have been reinstalled

and all tools removed from the engine.

Engine – Barring with starting system

1. Disengage the bayonet ring-nut (4) of connector

X4 with connector pliers (2) and withdraw
connector (3) from ECU.

2. Bar engine in unloaded condition: Press START

button.

3. Let the crankshaft rotate until oil pressure is

indicated.

4. Engine start is automatically interrupted when

specified starting period is expired. If necessary,

re-start the engine after approx. 20 seconds.

5. Plug connector X4 (3) and use connector pliers

(2) to secure the bayonet ring (4) by turning it
clockwise until it latches into place.

MS15009/00E 06-09

Summary of Contents for Detroit Diesel 12 V 2000 P62

















































































































































































































Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands

MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands