MTU Detroit Diesel 12 V 2000 P62 Technical Publication Download Page 19

Page: 19 / 208

Product Summary

Product Summary

2.1

Plant Overview

2.1.1

Use

1 Service and Automation

Module (SAM)

2 Peripheral Interface Module

601 (option)

3 Peripheral Interface Module

602 (option)

4 CAN bus

5 Engine with generator

6 Engine governor

7 Engine monitoring (optional)

8 LOP (optional)

Up to 8 additional Peripheral Interface Modules can be connected for linking to higher-level systems.

Functions

• Control of the engine.

• Monitoring of operating states.
• Closed-loop control of fuel injection and engine speed (depending on operating state).

• Indication of faulty operating states (display SAM (1)).

Features

• Electronic engine governing and control.

• Monitoring of inadmissible engine operating states.
• Display of fault messages and fault codes.

• Connecting cable for power supply to engine governor.

MS15009/00E 06-09

Summary of Contents for Detroit Diesel 12 V 2000 P62

















































































































































































































Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands

MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Search results

Summary of Contents for Detroit Diesel 12 V 2000 P62

Reviews:

Related manuals for Detroit Diesel 12 V 2000 P62

Brands by name

Popular brands