manualshive.com logo in svg

MTU 16V4000M73 series, Operating Instructions Manual

Share
Download
MTU 16V4000M73 series Operating Instructions Manual Download Page 245

8.17.4 Engine coolant – Filling

Preconditions

☑

Engine is cold.

☑

Engine is stopped and starting disabled.

☑

MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Engine coolant

WARNING

Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.

NOTICE

Cold coolant in hot engine can cause thermal stress.
Possible formation of cracks in the engine!
• Fill / top up coolant only into cold engine.

Variant 1: Filling coolant
through filler neck on expansion
tank

1.

Turn valve cover (1) on expansion tank on the
left to the first lock and release pressure.

2.

Continue to turn valve cover counterclock-
wise and remove.

MS150123/01E 2017-05

| Coolant System, General, High-Temperature Circuit | 245

TIM-ID: 0000014571 - 005

Summary of Contents for 16V4000M73 series











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands