1.6 Fire prevention and environmental protection, fluids and
lubricants, indirect materials
Fire prevention and safety
Flames, naked light and smoking are prohibited.
Ensure the area is well ventilated when working with combustible fluids and lubricants (e.g. cleaning agents).
The resultant steam/air mixture must be sufficiently diluted to prevent a potentially explosive atmosphere.
Rectify any fuel or oil leaks immediately. Oil or fuel on hot components can cause fires so keep the product
clean at all times. Do not leave rags saturated with fluids and lubricants on the product. Do not store com-
bustible materials near the product.
Clean welding points with a non-flammable fluid before welding. Do not carry out welding work on pipes and
components carrying oil or fuel.
When starting the engine with an external power source, connect the ground lead last and remove it first. To
avoid sparks in the vicinity of the battery, connect the ground cable from the external power source to the
ground cable of the engine or to the ground terminal of the starter.
Ensure that suitable extinguishing agents (fire extinguisher) are always available and that staff are familiar
with their correct handling.
Toxic substances may be present following a fire. Always wear protective gloves and other appropriate per-
sonal protective equipment when handling components.
Noise
Wear ear protectors in work areas with a sound pressure level in excess of 85dB (A).
Noise can lead to an increased risk of accident if acoustic signals, warning shouts or noises indicating dan-
ger are drowned.
Environmental protection and disposal
Dispose of used fluids, lubricants and components in accordance with local regulations.
Within the EU, batteries can be returned free of charge to the manufacturer where they will be properly recy-
cled.
Indirect materials, fluids and lubricants
Indirect materials, fluids and lubricants may be hazardous or contain toxic substances. Observe the informa-
tion provided in the safety data sheet for the product when using indirect materials and other chemical sub-
stances. The safety data sheet may be obtained from the relevant manufacturer or from MTU.
Only use fluids and lubricants which have been approved by the manufacture and are specified in the Fluids
and Lubricants Specifications. Request the latest version from the manufacturer.
Contamination of fluids and lubricants with aqueous urea solution (e.g. AdBlue
®
, DEF): Store fluids and lubri-
cants in separate containers and use different drip trays. Even tiny amounts of aqueous urea solution can
contaminate sensors and other components leading to malfunction.
Used oil
Used oil contains harmful combustion residue.
Wear protective gloves.
Wash relevant areas after contact with used oil.
MS150123/01E 2017-05
| Safety | 15
TIM-ID: 0000040536 - 013
