2.
Screw locknut (2) onto screw (1) up to the end of the thread.
3.
The long end of holder (3) must face downwards. Push holder (3) through the plate openings (6).
Note:
The holder (3) must lock the flywheel only, not the ring gear.
4.
Install screw (1) into the bore of holder (3) until the holder (3) is locked in position.
Note:
Tighten screw (1) alternately on both sides of the flywheel housing.
5.
Tighten screw (1) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M10
Tightening torque
30 Nm +3 Nm
6.
Fit locknut (2) of screw (1) on plate (6) and secure.
Removing the transport locking
device from driving end (KS)
1.
Release the locknuts (2) on both sides of the
flywheel housing, remove screw (1) and take
off holder (3).
2.
Unscrew screws (4) and remove together
with washers (5) and plate (6).
3.
Store the removed parts of the transport
locking device carefully for possible reuse.
MS150098/03E 2018-04
| Transport | 25
TIM-ID: 0000035999 - 004
