Disassembling exhaust turbo-
charger
1.
Mark position of compressor housing relative
to bearing housing (3).
2.
Remove screws from compressor hous-
ing (1).
Note:
The O-ring on the insert wall is not 100% leak-
tight. If oil penetrates the compressor hous-
ing, the cause can be found in the oil separa-
tor.
3.
Axially remove compressor housing (1) from
bearing housing (3).
4.
Remove O-ring.
5.
Unscrew screws (1) with locating washers.
6.
Remove diffuser from compressor housing.
7.
Remove nuts (3) on turbine housing (1).
8.
Axially remove turbine housing (1) from bear-
ing housing (2).
MS150098/03E 2018-04
| Exhaust Turbocharger | 167
TIM-ID: 0000081699 - 001
