8.7.2 Air filter – Removal and installation
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 6–50 Nm
F30027336
1
WARNING
Hot components/surfaces.
Risk of burns!
• Allow the engine to cool down to below 50 °C before beginning work.
• Wear suitable protective equipment/thermal gloves.
• Avoid unprotected contact with hot surfaces.
Air filter – Removal and installa-
tion
1.
Loosen clamp (2).
2.
Remove air filter (3) and clamp (2) from con-
necting flange (1) of intake housing.
3.
Check connecting flange (1) of intake hous-
ing for obstruction.
4.
Use suitable cleaning agent to clean contact
surfaces of intake housing and air filter.
Note:
The contact surfaces must be dry and free
from grease.
5.
Place new air filter (3) with clamp (2) onto in-
take housing (1).
6.
Use torque wrench to tighten screw on clamp (2) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
-
Tightening torque
20 Nm +2 Nm
176 | Air Filter | MS150098/03E 2018-04
TIM-ID: 0000044568 - 003
