026 – SS P-Diff-Lube Oil
Red alarm. engine shutdown.
Associated parameter 2.0154.932
Cause
Corrective action
Pressure loss via oil filter too high
(limit value 2).
1. Replace oil filter (→ Page 184).
2. If this fault message occurs again after unexpectedly short filter
runtime, check oil filter for deposits, change oil as necessary
(→ Page 182).
030 – SS Engine Overspeed
Red alarm. engine shutdown.
Associated parameter 2.2510.932
Cause
Corrective action
Overspeed detected by ECU. This
fault message usually follows
other fault messages. Check
speed governor, throttle closing
position
1. Check speed governor.
2. Check throttle closing position.
031 – HI ETC1 Overspeed
Yellow alarm.
Associated parameter 2.3011.931
Cause
Corrective action
Speed of primary turbocharger
too high (limit value 1).
u
Turbocharger speed sensor is not fitted at present. Check ECU
setting for this input.
032 – SS ETC1 Overspeed
Red alarm. engine shutdown.
Associated parameter 2.3012.932
Cause
Corrective action
Speed of primary turbocharger
too high (limit value 2).
u
Turbocharger speed sensor is not fitted at present. Check ECU
setting for this input.
036 – HI ETC2 Overspeed
Yellow alarm.
Associated parameter 2.3013.931
Cause
Corrective action
Speed of 1st secondary
turbocharger too high (limit value
1).
u
Turbocharger speed sensor is not fitted at present. Check ECU
setting for this input.
MS150098/03E 2018-04
| Troubleshooting | 107
TIM-ID: 0000027858 - 002
