Fault code No. Full designation
Meaning
Action
Related
parameter
No.
092
SS No Starter Speed
Alarm configuration limit val-
ue; Starter speed was not at-
tained; Termination of start-
ing sequence; Starter rotates
too slowly or does not rotate
at all.
Contact Service.
2.1090.92
3
093
SS T-Preheat
Alarm configuration limit val-
ue 2; Main warning: Preheat-
ing temperature too low;
coolant temperature too low
for engine start; engine start
interlock active.
Check preheater.
2.1090.92
2
094
LO T-Preheat
Alarm configuration limit val-
ue 1; Preheating temperature
too low; coolant temperature
too low for engine start.
Check preheater.
2.1090.92
1
095
AL Oil Priming Fail
Alarm configuration; oil pri-
ming failure.
Check oil priming
system.
2.1090.92
0
102
AL Consumption Meter
Faulty
Invalid fuel consumption dis-
play, checksum error in
EDM/EEPROM 1 (redundant
data record 1).
Contact Service.
1.8004.62
4
104
AL Eng Hours Counter
Defect
Checksum error of the hour
meter in the EDM/
EEPROM 1.
Contact Service.
18004.623
118
LO ECU Supply Voltage
Supply voltage too low (1st
limit value).
Check ECU supply
voltage.
Contact Service.
2.0140.92
1
119
LOLO ECU Supply Volt-
age
Supply voltage too low (2nd
limit value).
Check ECU supply
voltage.
Contact Service.
2.0140.92
2
120
HI ECU Supply Voltage
Supply voltage too high (1st
limit value).
Check ECU supply
voltage.
Contact Service.
2.0140.93
1
121
HIHI ECU Supply Volt-
age
Supply voltage too high (2nd
limit value); automatic engine
shutoff (dependent on appli-
cation engineering).
Check ECU supply
voltage.
Contact Service.
2.0140.93
2
122
HI T-ECU
Temperature in the ECU
housing too high (1st limit
value).
1. Improve engine
room ventilation.
2. Reduce power.
2.0132.92
1
134
15V POS ECU DEFECT
Internal voltage (-15 V DC)
defective; automatic engine
shutdown.
Replace ECU.
-
136
15V NEG ECU DEFECT
Internal voltage (-15 V DC)
missing; automatic engine
shutdown.
Contact Service.
-
M015695/03E 2013-03
| Troubleshooting | 63
TIM-ID: 0000033662 - 001
