7.2 Cylinder Liner
7.2.1 Cylinder liner – Endoscopic examination
Preconditions
☑
Engine is stopped and starting disabled
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Barring device
F6555766
1
Ratchet with extension
F30006212
1
Endoscope
Y20097353
1
Preparatory steps
1.
Remove cylinder head cover (→ Page 95).
2.
Remove injector (→ Page 98).
Positioning crankshaft at BDC
1.
Using barring device, turn crankshaft until crankshaft journal of the cylinder to be tested has reached
BDC.
2.
Insert endoscope into cylinder liner through injector seat.
Cylinder liner endoscopic examination
Findings
Measure
•
Thin carbon coating on carbon scraper ring
•
Slight localized additive deposits at top edge
•
Localized smooth areas at bottom edge
•
Carbon deposits on entire circumference between top piston ring
and bottom edge of carbon scraper ring
•
First signs of marks left by top piston ring
•
Bright mark on entire circumference
•
Faultless, even honing pattern
•
First signs of marks left by lower cooling bores
•
Running pattern seems darker
No action required.
•
Dark areas with even or varying degrees of discoloration
•
Beginning and end of the discoloration are not sharply defined and
do not cover the entire stroke area
•
Dark areas in the upper section of the cooling bore, remaining cir-
cumference cannot be faulted
•
Piston rings cannot be faulted
Further endoscopic examina-
tion required as part of mainte-
nance work.
•
On the entire circumference, apart from light areas of discoloration
(do not impair operation) clearly darker stripes that start at the top
piston ring
•
Heat discoloration in the direction of stroke and honing pattern
damage
•
Heat discoloration of piston rings
Cylinder liner must be replaced;
Service must be contacted.
M015695/03E 2013-03
| Task Description | 81
TIM-ID: 0000003304 - 004
