Temposonics
®
R-Series
V
EtherNet/IP™
Operation Manual
I 5 I
3.1 Order code of Temposonics
®
R-Series
V
RP
3. Identification
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
R P 5
D 5
1
U 2
a
b
c
d
e
f
g
h
b Design
G
Magnet slider, backlash free (part no. 253 421)
L
Block magnet L (part no. 403 448)
M
U-magnet, OD33 (part no. 251 416-2)
N
Magnet slider, longer ball-jointed arm (part no. 252 183)
O
No position magnet
S
Magnet slider, joint at top (part no. 252
182)
V
Magnet slider, joint at front (part no. 252
184)
a Sensor model
R P 5
Profile
*/
Non standard stroke lengths are available; must be encoded in 5 mm / 0.1 in. increments
d Stroke length
X X X X M
0025…6350 mm
X X X X U
001.0…250.0 in.
Standard stroke length (in.)*
Ordering steps
1 … 20 in.
1 in.
20…100 in.
2 in.
100…200 in.
4 in.
200…250 in.
10 in.
.
Standard stroke length (mm)*
Ordering steps
25 … 500 mm
25 mm
500…2500 mm
50 mm
2500…5000 mm
100 mm
5000…6350 mm
250 mm
c Mechanical options
A
Standard
V
Fluorelastomer seals for the electronics housing
g System
1
Standard
f Connection type
D 5 6
2 × M12 female connectors (5 pin),
1 × M8 male connector (4 pin)
D 5 8
2 × M12 female connectors (5 pin),
1 × M12 male connector (4 pin)
h Output
U 2 0 1
EtherNet/IP™, position and velocity
(1…20 positions)
U 2 1 1
EtherNet/IP™, position and velocity,
internal linearization (1…20 positions)
e Number of magnets
X X
01…20 Position(s) (1…20 magnet(s))
NOTICE
• For applications using more than 1 magnet, order the
additionalmagnets separately.
• The number of magnets is limited by the stroke length.
The minimum allowed distance between magnets (i.e. front face
of one to the front face of the next one) is 75 mm (3 in.).
• Use magnets of the same type for multi-position measurement,
e.g. 2 × U-magnets (part no. 251 416-2).
