Temposonics
®
R-Series
V
EtherNet/IP™
Operation Manual
I 6 I
3.2 Order code of Temposonics
®
R-Series
V
RH
a Sensor model
R H 5
Rod
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
R H 5
D 5
1
U 2
a
b
c
d
e
f
g
h
b Design
B
Base unit (only for replacement)
J
Threaded flange M22×1.5-6g (rod Ø 12.7 mm, 800 bar)
M
Threaded flange M18×1.5-6g (standard)
S
Threaded flange ¾"×16UNF - 3A (standard)
T
Threaded flange ¾"×16UNF - 3A (with raised-face)
c Mechanical options
A
Standard
B
Bushing on rod end (only for flange option »M«, »S« & »T«)
M
Thread M4 at rod end (only for flange option »M«, »S« & »T«)
V
Fluorelastomer seals for the electronics housing
Standard stroke length (in.)*
Ordering steps
1 … 20 in.
0.2 in.
20 … 30 in.
0.4 in.
30 … 40 in.
1.0 in.
40…100 in.
2.0 in.
100…200 in.
4.0 in.
200…300 in.
10.0 in.
d Stroke length
X X X X M
0025…7620 mm
X X X X U
001.0…300.0 in.
.
Standard stroke length (mm)*
Ordering steps
25 … 500 mm
5 mm
500 … 750 mm
10 mm
750…1000 mm
25 mm
1000…2500 mm
50 mm
2500…5000 mm
100 mm
5000…7620 mm
250 mm
g System
1
Standard
*/
Non standard stroke lengths are available; must be encoded in 5 mm / 0.1 in. increments
f Connection type
D 5 6
2 × M12 female connectors (5 pin),
1 × M8 male connector (4 pin)
D 5 8
2 × M12 female connectors (5 pin),
1 × M12 male connector (4 pin)
h Output
U 2 0 1
EtherNet/IP™, position and velocity
(1…20 positions)
U 2 1 1
EtherNet/IP™, position and velocity,
internal linearization (1…20 positions)
e Number of magnets
X X
01…20 Position(s) (1…20 magnet(s))
NOTICE
• For applications using more than 1 magnet, order the
additionalmagnets separately.
• The number of magnets is limited by the stroke length.
The minimum allowed distance between magnets (i.e. front face
of one to the front face of the next one) is 75 mm (3 in.).
• Use magnets of the same type for multi-position measurement,
e.g. 2 × U-magnets (part no. 251 416-2).
