MTech MA-1000, Installation & Operation Manual

Page: 44 / 107

43
2. FSUOM-S=> The FSUOM-S is used for the Internal Horn and external
lamp according to its usage as stated below. The sounders are non-
silenceable both sounders 1& 2 may be used for this operation.
Two or more detectors and a call-point (manual pull) must be grouped ( by address),
when one detector detects an alarm the panel will go into a normal alarm condition the
alarm relay will change state, the alarm led will activate including the nac
‘s.
When the second detector detects an alarm condition the global alarm nac will activate
(silenceable), output of the
FSUOM-S will activate the internal horn and the external
lamp after 30 seconds the output of the FSUOM-G (Solenoid) will activate. FSUOM-G
and will deactivate after 12 seconds.
When operating the call-point (manual pull) at any-time will activate the solenoid as an
xzone.
An example of GAS release screen
GAS B
GASB is used for releasing operation
“Aerosol usage”.
The following set-up of the panel parameters and FSUOM-G occur:
FSUOM-G => Output = Double knock & MCP Override, trigger by zone. Release time
30 seconds.