USER MANAUL
MGA
prime Q
MRU GmbH, D-74172 Neckarsulm
100 /
117
►
Change the desired unit.
►
Go back.
The change will be saved
17.2.
Operating analyser with Nickel Metal Hybrid (NiHM) Battery
►
Please note that the following information is only relevant for you if
an optional NiHM-Battery is installed in your analyser.
The NiHM-Battery is mounted in the analyser instead of a LiIon-Battery.
The optional NiHM-Battery is intended for air travel, because the
Regulations for the transport of LiIon-Battery during air travel can often
be problematic.
►
Note that the NiHM-Battery is not intended for measurement opera-
tion, as only a limited Battery life is available.
►
Measure only with a connected power supply.
Note that the analyser can be used for about 30 minutes in battery
mode.
►
Use the analyser in battery mode only for short measuring point
changes. Furthermore, short power failures can be bridged by battery
mode.
►
The analyser displays a message if no power supply is connected.
The message appears 45 seconds after switching on.
The message appears after 90 seconds if the power supply unit is
removed during operation.
