mru MGAprime Q User Manual Download

Page: 72 / 117

USER MANAUL

MGA

prime Q

MRU GmbH, D-74172 Neckarsulm

72 /

117

8.4.

Connections

8.4.

You can view the connections on the display of the analyser.

►

Open the menu Extras.



See also chapter 8.1 Open menu Extras, Page 68.

►

Press Connections.



The Connections of the analyser are displayed.



See also chapter 3.4 Connectors, Page 14.

8.5.

Automatic device start

You have the possibility that the analyser performs an automatic device
start at a time determined by yourself.

►

Open the menu Extras.



See also chapter 8.1 Open menu Extras, Page 68.

►

Press Automatic device start



A window appears.

►

Set the desired time for the automatic device start.

NOTE

Note that you can set an automatic device start for
max. 24 hours into the future.
A message is displayed if the time interval is too long.

►

Press ACCEPT.



A message appears.

►

Accept the message.

Summary of Contents for MGAprime Q






















































































































Search results

Summary of Contents for MGAprime Q

Reviews:

Related manuals for MGAprime Q

Brands by name

Popular brands

mru MGAprime Q, User Manual

Search results

Summary of Contents for MGAprime Q

Reviews:

Related manuals for MGAprime Q

Brands by name

Popular brands