Movement LXRC4, Instruction Manual

Page: 87 / 156

OPERATIONAL INSTRUCTIONS
SETTINGS PAGE
This control panel has the following configurable parameters.
1) Equipment model: Bicycle (bici)->Elliptical(EliP);
2) Total Distance;
3) Total Time;
4) Firmware Version;
Press and hold the STOP / RESET and START / ENTER keys simultaneously for 3 seconds
until the first Parameter (bici -> EliP) is shown on the SPEED window, press
or to ▲ ▼
set the equipment model and press START / ENTER to confirm and select the next
parameter.
The next step will show the total distance (accumulated distance or odometer) in the
distance window. Press START / ENTER to select the next parameter.
The next step will show the total time (accumulated hours or stopwatch) in the time
window. Press START / ENTER to select the next parameter.
The next step will display the firmware version in the Distance window. Press START /
ENTER to finalize.
Total time and distance
Total Time; 9999 hours -> 0001 = 1 hour
Total Distance: 9999km x 10 -> 0001 = 10 km
35