manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

3-20  Administrator’s Handbook

Adding Port interfaces

Note:

You must first 

ADD

 the VLAN before associating the Inter-VLAN-Routing Groups or the Por t Inter faces. 

Once you have added the VLAN, you access the Inter-VLAN-Routing screen and the Add Por t Inter face screen by 
selecting 

Display/Change VLAN

 from the VLAN Configuration screen.

Once you have created a VLAN entr y you must associate it with a por t inter face. This inter face may be either a 
physical por t, such as USB or Ethernet, or a Network ID (SSID) of a wireless LAN. If you have a Motorola 
Netopia

®

 Router model that offers Motorola’s VGx technology, you can also associate a VLAN with each of the 

physical Ethernet managed switch por ts.

When setting up a VLAN, typically you will add one or more physical por ts, such as an Ethernet por t or a 
wireless SSID.

Note:

You can associate two VLANs, one of which is 802.1x authenticated and the other is not, with the 

same por t. This allows you to have authenticated access for PCs on the wired-or wireless LAN to 
non-authenticated devices such as print ser vers.

Return to the VLAN Configuration screen, select 

Display/Change VLAN

, and from the pop-up menu, select the 

VLAN ID to be modified.

The Display/Change VLAN screen appears.

                                 VLAN Configuration

         VLAN Enable:                     +----------VLAN ID: NAME----------+
                                          +---------------------------------+
         Display/Change VLAN...           | 10: Network A                   |
         Add VLAN...                      |                                 |
         Delete VLAN...                   |                                 |
                                          |                                 |
                     Authentication Server|                                 |
                                          |                                 |
                                          |                                 |
                                          |                                 |
                                          +---------------------------------+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
Patton electronics 2888 Quick Start Manual preview
2888
Brand: Patton electronics Pages: 8
Quick Eagle Networks 5842 Specification Sheet preview
5842
Brand: Quick Eagle Networks Pages: 4
Queclink GV600 Series Instruction Manual preview
GV600 Series
Brand: Queclink Pages: 9
Navini Networks RIPWAVE 40-00460-00R User Manual preview
RIPWAVE 40-00460-00R
Brand: Navini Networks Pages: 35
Netis DL4305D Quick Installation Manual preview
DL4305D
Brand: Netis Pages: 16
Lutron Electronics Smart Bridge Quick Start Manual preview
Smart Bridge
Brand: Lutron Electronics Pages: 4
Galaxy Hunter Series Quick Start Manual preview
Hunter Series
Brand: Galaxy Pages: 30
LaCie 301300U - Ethernet Disk NAS Server User Manual preview
301300U - Ethernet Disk NAS Server
Brand: LaCie Pages: 62
National Instruments PXI PXITM -1000 User Manual preview
PXI PXITM -1000
Brand: National Instruments Pages: 55
Lantronix WP2002000-01 User Manual preview
WP2002000-01
Brand: Lantronix Pages: 75
ADTRAN 1700601G2 Quick Start Manual preview
1700601G2
Brand: ADTRAN Pages: 4
SMC Networks SMCGS10P-Smart Installation Manual preview
SMCGS10P-Smart
Brand: SMC Networks Pages: 68
AIC HA201-AP User Manual preview
HA201-AP
Brand: AIC Pages: 64
National Instruments NI ELVIS III Getting Started preview
NI ELVIS III
Brand: National Instruments Pages: 37
TCL UC11 Quick Start Manual preview
UC11
Brand: TCL Pages: 38
TCL HH40L1 User Manual preview
HH40L1
Brand: TCL Pages: 23

Brands by name

Popular brands

Load more brands