9-12 Administrator’s Handbook
2.
Select
Receiver IP Address or Domain Name
. Enter the IP address or domain name of the SNMP manager
you want to receive the trap.
3.
Select
Community String
if you enabled one in the SNMP Setup screen, and enter the appropriate
password.
4.
Toggle
Send Heartbeat Trap
on (
Yes
) or off (
No
). The hear tbeat setting is used to broadcast contact and
location information about your Router.
5.
Select
ADD TRAP RECEIVER NOW
and press Return. You can add up to seven more receivers.
Viewing IP trap receivers
To display a view-only table of IP trap receivers, select
Display/Change IP Trap Receiver
in the IP Trap
Receivers screen.
Modifying IP trap receivers
1.
To edit an IP trap receiver, select
Display/Change IP Trap Receiver
in the IP Trap Receivers screen.
2.
Select an IP trap receiver from the table and press Return.
3.
In the
Change IP Trap Receiver
screen, edit the information as needed and press Return.
Deleting IP trap receivers
1.
To delete an IP trap receiver, select
Delete IP Trap Receiver
in the IP Trap Receivers screen.
2.
Select an IP trap receiver from the table and press Return.
3.
In the dialog box, select
Continue
and press Return.
Add IP Trap Receiver
Receiver IP Address or Domain Name:
Community String:
Send Heartbeat Trap: Yes
ADD TRAP RECEIVER NOW CANCEL
Summary of Contents for Netopia Embedded Software
