manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

9-2  Administrator’s Handbook

General status

Current Date: 

The current date; this can be set with the Date and Time utility (see 

“Date and time” on 

page 3-37

).

Default IP Gateway: 

The gateway’s default gateway, which may be either manually configured or learned via 

DHCP. This is the value you assigned in the Default IP Gateway field. If you are using the gateway’s defaults 
(DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, it is 
shown here.

Primary DNS Server: 

If you are using the gateway’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you 

have assigned an IP address as your primar y default gateway, it is shown here.

Secondary DNS Server: 

If you are using the gateway’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you 

have assigned an IP address as a secondar y gateway, it is shown here.

Domain Name: 

The domain name you have assigned, typically the name of your ISP.

MAC Address: 

The Router’s hardware address, for those inter faces that suppor t DHCP.

IP Address:

 The Router’s IP address, entered in the IP Setup screen.

Current status

The current status section is a table showing the current status of the DSL connection. For example:

Profile Name: 

Lists the name of the connection profile being used, if any.

                                                         
                                  Quick View             10/11/2006 07:31:26 AM

 Default IP Gateway:   0.0.0.0
 Primary DNS Server:   0.0.0.0           Gateway installed -- Backup
 Secondary DNS Server: 0.0.0.0           Domain Name: netopia.com

 ----------------MAC Address--------IP Address-------Status-------------------- 
 Ethernet LAN:   00-00-c5-ff-70-00  192.168.1.1      100Mbps Full Duplex
 ATM ADSL WAN:  00-00-c5-ff-70-02  0.0.0.0
 USB LAN:        00-00-c5-9a-09-a9  192.168.1.1      Down

                             Current WAN Connection Status
 Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
 ISP                   1536   10  IP 92.163.4.1      Lcl  NAT 192.163.100.6

 VPN QuickView
                                 LED Status
 -PWR---USB---DSL Link Activity--ETHERNET Activity Link--+--------LEDS---------
                                                         | '-'= Off 'G'= Green
   G     -       -       -                G         G    | 'R'= Red 'Y'= Yellow

                        Current WAN Connection Status
 Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
 ISP                   1536   10  IP 92.163.4.1      Lcl  NAT 192.163.100.6

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
Z-Com ZCN-1523H-5-16 Quick Installation Manual preview
ZCN-1523H-5-16
Brand: Z-Com Pages: 18
ZyXEL Communications GS1100-10HP User Manual preview
GS1100-10HP
Brand: ZyXEL Communications Pages: 30
Allied Telesis AT-AR3050S Installation Manual preview
AT-AR3050S
Brand: Allied Telesis Pages: 80
Conel LR77 v2 SL User Manual preview
LR77 v2 SL
Brand: Conel Pages: 32
ExtraHop EDA 4200 Install preview
EDA 4200
Brand: ExtraHop Pages: 2
B+B SmartWorx Airborne M2M ABDN-er-DP55 Series User Manual preview
Airborne M2M ABDN-er-DP55 Series
Brand: B+B SmartWorx Pages: 120
Asante IntraSwitch 5324MT Quick Installation Manual preview
IntraSwitch 5324MT
Brand: Asante Pages: 2
Aztech na8300 Easy Start preview
na8300
Brand: Aztech Pages: 13
NETGEAR WNR2000v2 - Wireless- N 300 Router User Manual preview
WNR2000v2 - Wireless- N 300 Router
Brand: NETGEAR Pages: 144
IBM BladeCenter 1/10 Gb Uplink Ethernet SwitchModule Installation Manual preview
BladeCenter 1/10 Gb Uplink Ethernet SwitchModule
Brand: IBM Pages: 58
Tripp Lite B078-001-USB Specification preview
B078-001-USB
Brand: Tripp Lite Pages: 2
Gigabyte GN-WIKG User Manual preview
GN-WIKG
Brand: Gigabyte Pages: 10
IBM 4003-R04 User Manual preview
4003-R04
Brand: IBM Pages: 24
Foscam FN3104W User Manual preview
FN3104W
Brand: Foscam Pages: 92
Garland EdgeSafe M40G1AC User Manual preview
EdgeSafe M40G1AC
Brand: Garland Pages: 159
Crestron DM-TX-200-C-2G Quick Start preview
DM-TX-200-C-2G
Brand: Crestron Pages: 4
Idis DR-4100P Series Operation Manual preview
DR-4100P Series
Brand: Idis Pages: 97

Brands by name

Popular brands

Load more brands