manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

Multi-NAT   4-27

IP Passthrough

Motorola Netopia® Embedded Software Version 8.7.4 offers an IP passthrough feature. The IP passthrough 
feature allows for a single PC on the LAN to have the router’s public address assigned to it. It also provides PAT 
(NAPT) via the same public IP address for all other hosts on the private LAN subnet. Using IP passthrough:

•

The public WAN IP is used to provide IP address translation for private LAN computers.

•

The public WAN IP is assigned and reused on a LAN computer.

•

DHCP address ser ving can automatically ser ve the WAN IP address to a LAN computer.

When DHCP is used for addressing the designated passthrough PC, the acquired or configured WAN 
address is passed to DHCP, which will dynamically configure a single-ser vable-address subnet, and reser ve 
the address for the configured MAC address. This dynamic subnet configuration is based on the local and 
remote WAN address and subnet mask. If the WAN inter face does not have a suitable subnet mask that is 
usable, for example when using PPP or PPPoE, the DHCP subnet configuration will default to a class C 
subnet mask.

Note:

Globally, only one dynamically-configured DHCP subnet is available. If you configure 

multiple

 Connection 

Profiles to use IP Passthrough's DHCP option, when any of these profiles is established, the dynamic DHCP 
configuration will be over written. IP passthrough is restricted to the primar y LAN.

In the case of an Ethernet WAN router the IP passthrough configuration is located in the WAN Ethernet 
Configuration menu. For all other routers, it is located in the Connection Profiles' IP Profile Parameters.

The 

WAN Ethernet Configuration

 screen, found under the WAN Configuration menu, WAN Setup screen, 

appears as shown.

The 

IP Profile Parameters

 screen, found under the WAN Configuration menu, Add/Change Connection Profile 

screen, appears as shown.

                          WAN Ethernet Configuration

         Address Translation Enabled:       Yes
         Local WAN IP Address:              0.0.0.0

         NAT Map List...                    Easy-PAT List
         NAT Server List...                 Easy-Servers
         NAT Options...
         Stateful Inspection Enabled:       No

         Filter Set...
         Remove Filter Set
         Enable PPP over Ethernet:          Off
         WAN Ethernet Speed Setting...      Auto-Negotiation
         Wan Ethernet MAC Address:          00:fc:de:fa:dd:02

         DHCP Client Mode:                  Standards-Based

         RIP Options...

Set up the basic IP attributes of your Ethernet Module in this screen.

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
National Instruments NI 9229 Operating Instructions Manual preview
NI 9229
Brand: National Instruments Pages: 34
Patton electronics Patton SmartNode 2300 Series Specification Sheet preview
Patton SmartNode 2300 Series
Brand: Patton electronics Pages: 2
Paradyne 8540 Installation Instructions Manual preview
8540
Brand: Paradyne Pages: 12
A10 Thunder Series Manual preview
Thunder Series
Brand: A10 Pages: 52
Vonets MINI300 Quick Setting Manual preview
MINI300
Brand: Vonets Pages: 8
NETGEAR RP334 Specifications preview
RP334
Brand: NETGEAR Pages: 2
Variscite VAR-EXT-CB105 Datasheet preview
VAR-EXT-CB105
Brand: Variscite Pages: 18
UfiSpace S9700-23D Hardware Installation Manual preview
S9700-23D
Brand: UfiSpace Pages: 32
WAGO 852-1411 Operating And Assembly Instructions preview
852-1411
Brand: WAGO Pages: 2
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
OneAccess One80XM Installation Manual preview
One80XM
Brand: OneAccess Pages: 47
ZyXEL Communications Prestige 2864I Getting Started preview
Prestige 2864I
Brand: ZyXEL Communications Pages: 8
Zoom 4401F Specification Sheet preview
4401F
Brand: Zoom Pages: 2

Brands by name

Popular brands

Load more brands