manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

7-26  Administrator’s Handbook

•

Exclude

 is displayed if the entr y is not already excluded. 

Selecting 

Exclude

 excludes the IP address from the address ser ving pool so the address will not be ser ved 

to a client. If the IP address is currently leased to or reser ved for a client, you will be presented with a 
warning dialog asking you to confirm the operation.

•

Include

 is displayed if the entr y is either excluded or declined. 

                              Served IP Addresses

 -IP Address------Type----Expires—-Host Name/Client Identifier-----------------
 ----------------------------------SCROLL UP-----------------------------------
 192.168.1.100
 192.168.1.101
 +----------------------------------------------------------------------------+
 +----------------------------------------------------------------------------+
 |                                                                            |
 | IP Address is 192.168.1.108                                                |
 | Host Name is  Barr's XPi 120                                               |
 | Client ID is  EN: 00-00-c5-45-89-ef                                        |
 |                                                                            |
 |                                   OK                                       |
 +----------------------------------------------------------------------------+
 192.168.1.111    | Reserve... |
 192.168.1.112    +------------+
 192.168.1.113
 ---------------------------------SCROLL DOWN----------------------------------
 Lease Management...

                              Served IP Addresses

 -IP Address------Type----Expires—-Host Name/Client Identifier-----------------
 ----------------------------------SCROLL UP-----------------------------------
 192.168.1.100
 192.168.1.101
 192.1+-------------------------------------------------------------+
 192.1+-------------------------------------------------------------+
 192.1|                                                             |
 192.1| You are about to make changes that will affect an address   |
 192.1| that is currently in use. Are you sure you want to do this? |
 192.1|                                                             |
 192.1|             CANCEL                       OK                 |
 192.1|                                                             |
 192.1+-------------------------------------------------------------+
 192.168.1.111    | Reserve... |
 192.168.1.112    +------------+
 192.168.1.113
 ---------------------------------SCROLL DOWN----------------------------------
 Lease Management...

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
Salusfin SF-930EU User'S Installation Manual preview
SF-930EU
Brand: Salusfin Pages: 6
Dahua NVR2104-S2 Quick Start Manual preview
NVR2104-S2
Brand: Dahua Pages: 6
Konig CMP-HOMEPL1000 Manual preview
CMP-HOMEPL1000
Brand: Konig Pages: 73
Google AC-1304 User Manual preview
AC-1304
Brand: Google Pages: 14
NETGEAR AC1450 Installation Manual preview
AC1450
Brand: NETGEAR Pages: 14
U.S. Products maxg Quick Installation Manual preview
maxg
Brand: U.S. Products Pages: 80
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
TwinMOS Octopus G Series User Manual preview
Octopus G Series
Brand: TwinMOS Pages: 29
3Com 3C13640 Installation Manual preview
3C13640
Brand: 3Com Pages: 32
TP-Link TL-MR3620 Installation Manual preview
TL-MR3620
Brand: TP-Link Pages: 2
ADTRAN 1700601G2 Quick Start Manual preview
1700601G2
Brand: ADTRAN Pages: 4
Sun Microsystems McDATA Eclipse 1620 Release Notes preview
McDATA Eclipse 1620
Brand: Sun Microsystems Pages: 9
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
Camozzi UVIX Use And Maintenance Manual preview
UVIX
Brand: Camozzi Pages: 22
IBM Redbooks Emulex VFA5 Product Manual preview
Redbooks Emulex VFA5
Brand: IBM Pages: 15
Ubiquiti 3GStation Professional Quick Start Manual preview
3GStation Professional
Brand: Ubiquiti Pages: 24

Brands by name

Popular brands

Load more brands