manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

6-4  Administrator’s Handbook

•

A pop-up window displays a list of IKE Phase 1 Profiles that you have configured. If you have not previously 
configured an IKE Phase 1 Profile, the selection 

ADD PH1 PROFILE

 allows you to do that now.

Adding an IKE Phase 1 Profile

IKE Phase 1 Profiles contain the information that the two ends of a tunnel use to authenticate each other and 
the parameters that govern the public key cr yptography exchanges that are required to generate new keys 
periodically. Make sure to add an IKE Phase 1 Profile. If an IKE Phase 1 Profile is not assigned to an IKE 
Connection Profile, all VPN traffic for that profile will be discarded.

Select 

ADD PH1 PROFILE

. The Add IKE Phase 1 Profile screen appears.

                            +-IKE Phase1 Profile--+
                            +---------------------+
                            | <<ADD PH1 PROFILE>> |
                            | <<NONE>>            |
         Key Management...  |                     |
         IKE Phase 1 Profile|                     |
                            |                     |
         Encapsulation...   |                     |
                            |                     |
                            |                     |
                            |                     |
         ESP Encryption Tran|                     |
         ESP Authentication |                     |5-96
                            |                     |
         Compression Type...|                     |
                            |                     |
                            |                     |
                            |                     |
         Advanced IPsec Opti|                     |
                            |                     |
                 COMMIT     +---------------------+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

                         Add IKE Phase 1 Profile

         Profile Name:                      IKE Profile 1

         Mode...                            Aggressive Mode

         Local Identity Type...             IPv4 Address
         Local Identity Value:              0.0.0.0
         Remote Identity Type...            IPv4 Address
         Remote Identity Value:             0.0.0.0
         Authentication Method...           Shared Secret
         Shared Secret:                     ********************
         Encryption Algorithm...            des
         Hash Algorithm...                  md5
         Diffie-Hellman Group...            Group 2 (1024 bits)
         Xauth Options...
         Advanced IKE Phase 1 Options...

         ADD IKE PHASE 1 PROFILE            CANCEL

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

Makita 3606 Parts Breakdown preview
3606
Brand: Makita Pages: 2
3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Brand: 3onedata Pages: 3
3One data 7212 User Manual preview
7212
Brand: 3One data Pages: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Brand: 3onedata Pages: 33
Aastra CNX Product Brief preview
CNX
Brand: Aastra Pages: 2
Nayar Systems GSR Manual preview
GSR
Brand: Nayar Systems Pages: 37
Paradyne MCC Installation Instructions Manual preview
MCC
Brand: Paradyne Pages: 11
Paradyne Hotwire 8784 Installation Instructions Manual preview
Hotwire 8784
Brand: Paradyne Pages: 19
Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Brand: Paradyne Pages: 32
Paradyne COMSPHERE 3550 Series User Manual preview
COMSPHERE 3550 Series
Brand: Paradyne Pages: 153
Paradyne Jetstream CPX-1000 Reference Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 141
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Brand: Paradyne Pages: 28
Paradyne COMSPHERE 6800 Series Installation And Enabling/Disabling Instructions preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 7
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
Lanner ICS-P570 User Manual preview
ICS-P570
Brand: Lanner Pages: 63
ZyXEL Communications P-660W-T1 v2 User Manual preview
P-660W-T1 v2
Brand: ZyXEL Communications Pages: 244
ICP DAS USA USB-87P1 User Manual preview
USB-87P1
Brand: ICP DAS USA Pages: 62

Brands by name

Popular brands

Load more brands