manualshive.com logo in svg

Motorola Netopia Embedded Software, Handbook

The Motorola Netopia Embedded Software Handbook is a comprehensive manual designed to guide users through the functionalities and features of this exceptional product. Download your free copy from our website and explore the limitless possibilities this software offers.

Share
Download
background image

11-6  Administrator’s Handbook

Factory Defaults

You can reset the Router to its factor y default settings. In the Utilities & Diagnostics screen, select 

Revert to 

Factory Defaults

 and press Return. Select 

CONTINUE

 in the dialog box and press Return. The Router will 

reboot and its settings will return to the factor y defaults, deleting your configurations.

In an emergency, you can also use the Reset switch to return the gateway to its factor y default settings. Call 
Motorola Technical Suppor t for instructions on using the Reset switch.

If you lose your password and are unable to access the Telnet screens, you can manually reset the gateway in 
an emergency. See 

Appendix A, “Troubleshooting.”

Beginning with Software Version 8.5, you can avoid having to completely reconfigure the Router by saving a 
Factor y Default configuration. See 

“Factory Default to a saved configuration” on page 10-47

.

Transferring Configuration and Software Files with TFTP

Trivial File Transfer Protocol (TFTP) is a method of transferring data over an IP network. TFTP is a client-ser ver 
application, with the gateway as the client. To use the Router as a TFTP client, a TFTP ser ver must be available. 
Motorola, Inc., has a public access TFTP ser ver on the Internet where you can obtain the latest software 
versions.

To use TFTP, select 

Trivial File Transfer Protocol (TFTP)

 in the Statistics & Diagnostics screen and press 

Return. The Trivial File Transfer Protocol (TFTP) screen appears.

The sections below describe how to update the Router’s software and how to download and upload 
configuration files.

                     Trivial File Transfer Protocol (TFTP)

         TFTP Server Name:

         Firmware File Name:         /Users/njbill/Desktop/nl861.bin

         GET ROUTER FIRMWARE FROM SERVER...

         Config File Name:

         Get Configuration Destination...   Current Configuration
         GET CONFIG FROM SERVER...

         Send Configuration...              Current Configuration
         SEND CONFIG TO SERVER...

         TFTP Transfer State -- Idle
          
         TFTP Current Transfer Bytes -- 0

Summary of Contents for Netopia Embedded Software





















































































































































































































































































































































Reviews:

No comments

Related manuals for Netopia Embedded Software

Panasonic BL-C20 Troubleshooting Manual preview
BL-C20
Brand: Panasonic Pages: 18
IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
Net to Net Technologies UIM-1000T Installation Instructions preview
UIM-1000T
Brand: Net to Net Technologies Pages: 4
Hanwha Techwin Wisenet PRN-6400B4 Quick Manual preview
Wisenet PRN-6400B4
Brand: Hanwha Techwin Pages: 14
QUNDIS RNN5 Operating And Installation Instructions preview
RNN5
Brand: QUNDIS Pages: 42
VoiceLine InnoMedia MTA 3328-2R Getting Started Manual preview
InnoMedia MTA 3328-2R
Brand: VoiceLine Pages: 18
ADTRAN NetVanta Serial Dial Backup Interface Module (DIM) none Quick Start Manual preview
NetVanta Serial Dial Backup Interface Module (DIM) none
Brand: ADTRAN Pages: 2
Alphatech Blue Gate ISDN BRI Brave Quick Start Manual preview
Blue Gate ISDN BRI Brave
Brand: Alphatech Pages: 6
Extron electronics Network Adapter AC AAP Specifications preview
Network Adapter AC AAP
Brand: Extron electronics Pages: 2
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Brand: Riverbed Pages: 140
MAKER MADE MASLOW CNC Setting Up preview
MASLOW CNC
Brand: MAKER MADE Pages: 40
R.V.R. Elettronica PTX30-UHT Installation, Technical And Maintenance Manual preview
PTX30-UHT
Brand: R.V.R. Elettronica Pages: 171
Gemtek WL-613F User Manual preview
WL-613F
Brand: Gemtek Pages: 29
H3C SecPath F5010 Installation, Quick Start preview
SecPath F5010
Brand: H3C Pages: 2
mikroElektronika mikroETH 100 Manual preview
mikroETH 100
Brand: mikroElektronika Pages: 6
Lancom 1711+ VPN Manual preview
1711+ VPN
Brand: Lancom Pages: 79
LevelOne GNC-0112 Quick Installation Manual preview
GNC-0112
Brand: LevelOne Pages: 10

Brands by name

Popular brands

Load more brands