78
(3)Re-Trak Mirror
*
This mirror can be used by the patient without blocking the light.
It can be installed anytime before or after installation of the main unit.
Contact your local dealer or J.Morita Corp. for details.
1)Handling
Use the little handle on the mirror to pull it down in front of the light.
Position it 15 to 30 cm from the patient for easy viewing.
Swing it back up on top of the light when it is not in use.
2)Use with and without the light on
a)For a well lighted view
Use the mirror with the light on to give the patient a well-lighted
view of his own oral cavity. The half mirrors on both sides cut out
approximately 40% of the light; this brightness level is better for the
patient to see clearly.
b)For viewing a larger area
Put the mirror in position with the light shining into the patient’s
oral cavity and then turn the light off.
The mirror will include the half mirrors on both sides and give the
patient a view of an area twice the size of the one when the light is
on.
The half mirrors on the sides will not be quite as bright as the main
mirror in the center.
(4)Auto Light
*
If the unit is equipped with auto light, it will work in the following way:
1)Auto On and Off
The light can be linked to the auto-positioning switches on both the
dentist and assistant’s sides.
The chart to the right shows when it will turn on and off. It can also be
set to turn on when an instrument is picked up. (See (1) 2) above.)
2)Touch-free Operation
The light can be turned on and off by stepping on the pedal when all the
dentist’s instruments (except the three-way syringe) are put away.
Step on the pedal to turn it on and step on the pedal again to turn it off.
3)Switch Operation
Switches to turn the light on and off are located on both the dentist and
assistant’s sides.
Operating Light
Switch
Handle Mirror
Half Mirrors
[5]Operation 13.(3)(4)
*: Option
Auto Light Operation
Switch
ON or OFF
Positions 1 and 2
ON
Reset
OFF
Memory(mouth rinsing)
OFF
Memory(return)
ON