59
3)Basin Unit Panel
These are the adjustments and connections on the basin unit panel.
Their uses are explained below, and in sections [5] 7. and 8. of this
manual.
The panel is usually covered by a door.
Open the door in the following way.
a)Pull the right hand side of the door with your finger and slide it all the
way to the left.
Do not use force to pull on the door or push it in;
this could damage it.
b)To close the door, push on the left side with your finger and slide it
back into place.
4)Vacuum Tank Auto-cleaning System
This system cleans the vacuum tank with both air and running water.
Do this between patients.**
a)Press the vacuum auto-cleaning switch on assistant’s switch panel
B to perform auto-cleaning.
b)Cleaning will terminate automatically after the specified time has
elapsed. To stop it sooner, press the auto-cleaning switch again.
c)After cleaning has finished, rinse the basin with approximately 2
cups of water.
**: Vacuum tank auto-cleaning can be linked to the Reset position for
chair auto-positioning.Do this using the User Settings display.
See [5] 3. (7) 7) A of this manual.
Ｂ
ADVICE
[5]Operation 7.(1)
Door Basin Unit Panel
（Close）
Water knob for Snap-on Connectors Basin Manual Water
Auto Filler
Lamps
Auto Filler Water
Adjustment
Warmer Switch Water Connector
AirConnector
Vacuum
Auto-cleaning Switch