Moog Tritech Gemini 720is Product Manual Download

Page: 9 / 92

Introduction

Gemini 720is Imaging Sonar

Document: 0703-SOM-00002, Issue: 7

© Tritech International Ltd.

Caution

Power should only be applied to the

MAIN

port of the Gemini. The

AUX

port, if

fitted, provides a regulated power supply - please refer to Section 2.1, “Gemini

720is” for more information.

1.4. Software Version

Note

The instructions within this manual apply to the following software versions:

• Gemini software - 1.20.18 onwards

• Seanet Pro - 2.23 build 540 onwards

Screenshots and images within the software may differ slightly from the ones

used within this manual. The latest version of software can also be downloaded

from

www.tritech.co.uk

Summary of Contents for Tritech Gemini 720is





























































































Search results

Summary of Contents for Tritech Gemini 720is

Reviews:

Related manuals for Tritech Gemini 720is

Brands by name

Popular brands

Moog Tritech Gemini 720is, Product Manual

Search results

Summary of Contents for Tritech Gemini 720is

Reviews:

Related manuals for Tritech Gemini 720is

Brands by name

Popular brands