Gemini Software Operation
Gemini 720is Imaging Sonar
Document: 0703-SOM-00002, Issue: 7
56
© Tritech International Ltd.
The firmware update process
will start. It is a two step
process and both must be
completed in order for the
firmware to be completely
upgraded.
It is important that power to the
Gemini is not disconnected at
any point during the upgrade
process
Once both steps are fully
completed the Sonar will
reboot in order to finalise the
upgrade process
Once rebooted, the update
progress window will remain
visible until the
Ok
button is
clicked.
Once fully updated the
Update
button will no longer
be visible and when connected
Online
all the Sonar details
will be in green text.
If your Gemini Sonar fails to update correctly please contact
Tritech International Ltd
for
assistance.
5.5. Multiple Head Operation
Note
The following instructions refer to a Gemini Sonar with a 120° swathe. Other
products within the Gemini range may have differing swathes, but the same basic
principles described apply.
The number of heads connected to a system can be selected using the drop-down list on the
right-hand pane of the
Advanced
screen.
