background image

 SmartSELECT Merchant Operating Manual v 2.0

41

Chapter 6:  Administrative Transactions

Administrative Transactions allow you to manage and perform the SmartSELECT 
features that require communication with the Moneris Host. These include daily 
functions such as logging on and off, producing reports and processing end-of-day 
settlement, and occasional functions such as Host Initialization.

6.1: Initializing the SmartSELECT Terminal

This function sends information about the SmartSELECT terminal to the Moneris 
Host and receives additional parameters and information from the Host. It MUST 
be performed once, after completing configuration in order to use your SmartSE-
LECT terminal to process any transactions.

Initialization is performed automatically during the Configuration Shortcut how-
ever, if the Shortcut is interrupted, you must perform the Initialization from the 

Administrative Transactions

 menu.

Note:

The terminal’s communication parameters must be set up before the 
Initialization function can be performed. (see Section 

4.7: 

Communications Parameters

).

6.1.1: Terminal Initialization (First Initialization)

If you abandoned the Configuration Shortcut you will need to perform this trans-
action in order to complete the configuration.

IMPORTANT:

If your communications type is “Dial”, ensure that 
the Dial Communications parameters have been 
configured before attempting this transaction.

From the Idle screen:

1. Press 

Menu

. The 

Administrative Transactions

 menu appears.

2. Select 

Host Initialization

. The 

Merchant ID

 prompt appears with a numeric 

keypad.

3. Key in the Merchant ID (min. 13 and max. 19 alphanumeric characters) and 

press 

Enter

. The 

Enter Initialization Phone Number

 prompt appears with a 

numeric keypad.

4. Key in the Initialization Phone Number (min. 7 and max. 16 numeric digits) 

and press 

Enter

.

Note:

This prompt appears only if your communications type is “Dial” OR 
your terminal is not configured to “Dial” and is not polling the LAN or 
3201 Host.

5. The terminal communicates with the Moneris Host and displays the 

Host Ini-

tialization

 status prompt.

6. After a successful Initialization, the terminal beeps and returns to the Idle 

Screen with the 

Ready Please Logon

 prompt. 

Summary of Contents for smartselect







































































































































































































Reviews: