Moneris smartselect, Operating Manual

Page: 52 / 198

Administrative Transactions
42 SmartSELECT Merchant Operating Manual v 2.0
The Initialization is complete and the terminal is now ready to perform financial
transactions whenever it is logged on (see
section 6.2: Logon ).
6.1.2: Terminal Re-initialization
The Moneris Merchant Service Centre may ask you to re-initialize your terminal
from time to time.
From the Idle screen:
1. Press
Menu
. The
Financial Transaction
menu appears.
2. Press
Admin
. The
Administrative Transactions
menu appears.
3. Select
Host Initialization
. The
Retain Current Merchant Settings?
prompt
appears.
• To retain the current Merchant ID and Initialization Phone Number settings,
select
Yes
. Go to step 6.
• To change these two settings, select
No
. The
Enter Merchant ID
prompt
appears.
4. Key in the Merchant ID using the keypad on the screen (min. 13 and max. 19
alphanumeric characters) and press
Enter
. The
Enter Initialization Phone
Number
prompt appears.
5. Key in the Initialization Phone Number (min. 7 and max. 16 numeric digits)
and press
Enter
.
Note: This prompt only appears if your communications type is “Dial” OR
your terminal is not configured to “Dial” and is not polling the LAN or
3201 Host.
6. The terminal communicates with the Moneris Host and displays the
Host Ini-
tialization
status prompt.
7. After a successful Initialization:
• the terminal beeps and the
Do You Wish to Clear Storage?
prompt
appears.
OR
• if you entered a new Merchant ID at step 4 of this process, the terminal
storage is cleared automatically and the terminal goes to the Idle Screen
with the
Ready Please Logon
prompt. The Initialization is complete.
8. Select
Yes
to clear the data capture area (the terminal memory) and the termi-
nal totals.
OR
Select
No
to leave the current settings and terminal totals in the terminal
memory.
The
Ready Please Logon
prompt appears.
The terminal is now ready to perform financial transactions whenever it is logged
on (see
Section 6.2: Logon ).