Moneris smartselect, Operating Manual

Page: 135 / 198

SmartSELECT Merchant Operating Manual v 2.0 125
ValueLink Gift Card Program
• If this is the first time a Terminal Number for ValueLink Gift Card has
been entered on the terminal, the
Gift Card Configuration
menu reap-
pears.
• If this Terminal Number replaces a previously entered Terminal Number,
the
Do You Wish to Clear Storage?
prompt appears.
Select
Yes
to clear previous ValueLink Gift Card transactions from the
memory and reset the ValueLink Gift Card terminal totals to zero
OR
Select
No
to retain the previous ValueLink Gift Card transactions and
totals.
The
Gift Card Configuration
menu reappears.
13. Press
Exit
to return to the
Terminal Configuration
menu.
The SmartSELECT is now configured to process ValueLink Gift Cards.
G.2.2: Changing Terminal Configuration for ValueLink
If you wish to change the settings of any of the list items on the
Gift Card Config-
uration
menu, follow steps 1 through 4 of section G.2.1: Enabling ValueLink on
the Terminal , then select the list item you wish to change, and select the new set-
ting or key in the new data. The
Gift Card Configuration
menu will reappear and
the change will be displayed on the list item.
If
Gift Card Enabled
is set to “No”, the other three list items (
Host Routing
Code
,
Terminal ID
and
Terminal Number
) are disabled and greyed-out on the
screen. They cannot be changed unless the Gift Card option is enabled.
G.2.3: Disabling ValueLink on the Terminal
1. On the Idle screen, press
Menu
. The
Financial Transactions
menu appears.
2. Press
Config
. The
Terminal Configuration
menu appears.
3. Select
Gift Card Configuration
. The
Swipe Admin Card
prompt appears.
4. Swipe the POS Admin card.The
Gift Card Configuration
menu appears.
5. Select
Gift Card Enabled
. The
Enable Gift Card?
prompt appears.
6. Select
No
. The
Gift Card Configuration
menu reappears.
7. Press
Exit
to return to the
Terminal Configuration
menu.
The SmartSELECT is no longer configured to process ValueLink Gift Cards.