manualshive.com logo in svg

Moduline GCE060D, Original Instructions Manual

Share
Download
Moduline GCE060D Original Instructions Manual Download Page 52

USA Ed. 1116

20.14 • DOOR LOCK ALARM

20.15 • UNLOCKING THE DOOR IF THERE IS NO VOLTAGE OR FAILURE

20.16 • MANUAL UNLOCKING OF THE DOOR

In case an anomaly occurs to the “Door Lock” the 

flashing padlock symbol appears. Any cooking in 

progress is NOT interrupted, but the door lock will 

no longer be operating. If the alarm persists even 

after switching the appliance off and on, contact the 

technical support.

In the event of a lack of electrical voltage or a door 

lock failure during a cooking, the door remains 

locked closed. To unlock the door, proceed in manual 

mode.

Take the key supplied with the product and insert it 

in the dedicated “unlock” present on the side of the 

oven near the handle.

Turn the key clockwise until it stops. Keeping the key 

locked where it stopped and simultaneously with the 

other hand rotate the handle so as to open the door.

 52

Summary of Contents for GCE060D






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands