manualshive.com logo in svg

Moduline GCE060D, Original Instructions Manual

Share
Download
Moduline GCE060D Original Instructions Manual Download Page 35

USA Ed. 1116

18 • WASHING PROGRAMS (OPTIONAL)

To access the washing programs, press the P button 

and turn the knob to the left.

Programs available:

•  q

ri - quick rinse (about 15 minutes)

•  SCS - soft washing (about 1 hour and 30 minutes)

•  SCH - hard washing (about 2 hours and 30 minutes)

•  riA - rinse aid (about 1 hour)

If the temperature in the cooking cavity is too high 
to perform a washing cycle, the “too HOT” messa-
ge is displayed. Cool the cavity before starting a 
washing cycle.

NOTE - Before carrying out any type of cleaning, do 
the following:
•  Remove the trays and racks
•  Clean the drain filter
•  Remove food debris
•  Close the door

NOTE - DO NOT OPEN THE DOOR DURING THE WA-
SHING OPERATION. Any opening of the door blocks 

the current washing by displaying the “CLD” messa-

ge flashing on the display accompanied by a beep. 

Closing the door does restart the washing from where 

it left off.

IMPORTANT - In case the appliance is provided with 

the optional “Door Lock”, it will be activated automa-

tically at the start of one of the 4 washing programs 

(blocking the door). The door lock will turn off auto-

matically at the end of the washing.

While running a washing program it is possible 

to temporarily disable the door lock by pressing 

“START/STOP”; the door lock icon disappears from 

the display and the word “PAU” appears flashing 

indicating that the washing program is paused. To re-

sume the program and reactivate the door lock press 

“START/STOP” again.

NOTE - During the washing program, the deactivation 

of the door lock is done only by pressing “START/

STOP” without entering any password.

 35

Summary of Contents for GCE060D






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands