manualshive.com logo in svg

Moduline GCE060D, Original Instructions Manual

Share
Download
Moduline GCE060D Original Instructions Manual Download Page 49

USA Ed. 1116

20.5 • VENT PROBE ALARM

20.6 • DISCHARGE PROBE ALARM

20.7 • KEYBOARD CONNECTION ALARM

20.8 • ALARM RELATED TO THE CONNECTION OF THE EXPANSION CARD (IF ANY)

In case failures occur in the vent probe, the “ALL 01” 

(which are alternated to the main screen) message is 

displayed. 

Any cooking in progress IS NOT interrupted, but the 

steam injection adjustment will be only timed.

If the alarm persists, contact the technical assistance.

In case failures occur in the discharge probe, the 

“ALL 02” (which are alternated to the main screen) 

message is displayed. 

Any cooking in progress IS NOT interrupted, but the 

discharge steam reduction adjustment is interrupted.

If the alarm persists, contact the technical assistance.

If you detect a lack of communication between the 

main board and the keyboard for more than 10 se-

conds, the “bUS no conn” message appears and the 

required acoustic signals turn on.

Any cooking in progress will be interrupted until the 

problem is resolved. 

To silence the buzzer, press any key.

If the alarm persists, contact the technical assistance.

If you detect a lack of communication between the 

main board and the expansion card, the “Err 06” 

message appears and the required acoustic signals 

turn on.

Any cooking in progress will be interrupted until the 

problem is resolved. 

To silence the buzzer, press any key.

If the alarm persists, contact the technical assistance.

 49

Summary of Contents for GCE060D






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands