manualshive.com logo in svg

Moduline GCE060D, Original Instructions Manual, Page: 30 / 53

Share
Download
Moduline GCE060D Original Instructions Manual Download Page 30

USA Ed. 1116

13 • DISPLAYING TEMPERATURES

Simultaneously pressing the CAVITY TEMPERATURE 

and PRObE / TIME keys for 5 seconds will allow you 

accessing the screen that displays the current tempe-

ratures.

Turning the knob, you can view the temperatures 

relating to:

•  Pt1 - Cavity temperature

•  Pt2 - Discharge temperature

•  Pt3 - Vent temperature 

•  Pt - Core probe temperature

After about 30 seconds the device automatically 

comes out of the temperature display, press the P 

button to exit manually (back).

14 • SAVING PROGRAMS

After finishing the program in manual mode, you can 

save the preset program.

Press the P button for about 5 seconds. It’s displayed 

the screen that allows the management of programs. 

Press ENTER to select the SA (save) item.

NOTE - The programs are saved with the name P 

(Program) followed by a 2-digit number.

The device automatically proposes the first available 

number for saving the recipe; turn the knob to change 

it.

NOTE - If you change an existing program, the device 

proposes to overwrite it.

NOTE - If an existing number is entered, it is display-

ed by means of PrE. However, you can still overwrite 

it.

Press ENTER to save. The device only requires a 

further confirmation, so press again ENTER. 

The saving is confirmed by a double beep and the 

main screen reappears.

NOTE - You can save up to 95 programs. 

Saving a program can only take place with the device 

in STOP mode.

 30

Summary of Contents for GCE060D






















































Reviews:

No comments