Mitsubishi q64rd, User Manual

Page: 159 / 176

App. - 9 App. - 9
MELSEC-Q
APPENDIX
Appendix 3.3 G(P).OGLOAD
Reads the offset/gain values of the user range setting of the Q64RD/Q64RD-G to the
CPU.
Usable devices
Internal device
(System, user) Link direct device
J \
Constant
Set data
Bit Word
File
register
Bit Word
Intelligent
function
module
device
U \G
Index
register
Z
K, H S
Other
(S) — — — — —
(D) — — — —
Command
G.OGLOAD
Command
GP.OGLOAD
Un (S) (D)
Un (S) (D)
[Instruction
symbol]
[Execution
condition]
G.OGLOAD
GP.OGLOAD
Set data
Device Description Setting range Data type
Un Start I/O number of the module 0 to FE
H
Binary 16 bits
(S) Start number of the device in which control data is stored.
Within the range of the
specified device
Device name
(D)
Device that is turned ON 1 scan on completion of dedicated
instruction processing.
(D) + 1 also turns ON at an abnormal completion.
Within the range of the
specified device
Bit
Control data
1
(1/4)
Device Item Set data
Setting
range
Set by
(S) System area — — —
(S) + 1 Completion status
Stores the status when the
instruction is complete.
0 : Normal completion
Other than 0: Abnormal
completion
— System
(S) + 2
(S) + 3
System area — — —
(S) + 4 3-wire CH1 Factory default offset value — — System
(S) + 5 3-wire CH1 Factory default offset value — — System
(S) + 6 3-wire CH1 Factory default gain value — — System
(S) + 7 3-wire CH1 Factory default gain value — — System
(S) + 8 3-wire CH1 User range settings offset value — — System
(S) + 9 3-wire CH1 User range settings offset value — — System
(S) + 10 3-wire CH1 User range settings gain value — — System
Q64RD
(S) + 11 3-wire CH1 User range settings gain value — — System
1 Setting is not necessary. If setting is made, the offset/gain values will not be read properly.