© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights reserved.
Revision: B
Revision: B
Document ID: 615023
Document ID: 615023
56 (244)
56 (244)
PBV20N2
PBV20N2
Service
Service Manual
Manual
5.10
5.10
Load wheels
Load wheels
Figure 36. Load wheels overview
Figure 36. Load wheels overview
Check the wear of
Check the wear of the load wheels:
the load wheels:
•
•
The diameter of a new load wheel is 85 mm.
The diameter of a new load wheel is 85 mm.
•
•
It is recommended that the load wheel is replaced when its diameter reaches
It is recommended that the load wheel is replaced when its diameter reaches
76 mm.
76 mm.
NOTE: To access the load wheels, lift
NOTE: To access the load wheels, lift up the forks and the truck
up the forks and the truck so that the load
so that the load
wheels are off the floor (see the
wheels are off the floor (see the correct lifting points in the section
correct lifting points in the section 5.1
5.1 of this manual)
of this manual)
and turn the load wheel so that you can access the bolt holding the wheel in place.
and turn the load wheel so that you can access the bolt holding the wheel in place.
Disassembly of the load
Disassembly of the load wheel:
wheel:
1.
1.
Remove the bolt holding the load
Remove the bolt holding the load
wheel in the bracket.
wheel in the bracket.
2.
2.
Remove the load wheel from the
Remove the load wheel from the
bracket.
bracket.
3.
3.
Check the condition of the slide
Check the condition of the slide
bearing. Replace the part, if
bearing. Replace the part, if needed.
needed.
4.
4.
Check the condition of the bracket
Check the condition of the bracket
shafts. Replace the part, if
shafts. Replace the part, if needed.
needed.
https://www.forkliftpdfmanuals.com/