© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights reserved.
Revision: B
Revision: B
Document ID: 615023
Document ID: 615023
13 (244)
13 (244)
PBV20N2
PBV20N2
Service
Service Manual
Manual
•
•
To avoid back injury, use a
To avoid back injury, use a hoist when lifting components weighin
hoist when lifting components weighing 23 kg
g 23 kg (51 lb) or
(51 lb) or
more. Make sure all chains, hooks, slings, etc.,
more. Make sure all chains, hooks, slings, etc., are in good condition and of the
are in good condition and of the
correct capacity. Make sure all hooks are
correct capacity. Make sure all hooks are positioned correctly. Lifting eyes are not
positioned correctly. Lifting eyes are not
to be side-loaded during a lifting operation.
to be side-loaded during a lifting operation.
•
•
Make sure all
Make sure all protective devices including guards and shields are
protective devices including guards and shields are properly installed
properly installed
and functioning correctly before starting a repair. If a
and functioning correctly before starting a repair. If a guard or shield must be
guard or shield must be
removed to perform the repair work, use
removed to perform the repair work, use extra caution.
extra caution.
•
•
Always suppo
Always support the mast and
rt the mast and carriage to keep
carriage to keep the carriage o
the carriage or attachments ra
r attachments raised
ised
when performing maintenance or repair work that requires the mast to be in the
when performing maintenance or repair work that requires the mast to be in the
raised position.
raised position.
3.2
3.2
Personal safety
Personal safety
•
•
Remove all rings, watches and other pieces of metal jewellery before you
Remove all rings, watches and other pieces of metal jewellery before you start
start
working on the truck. If
working on the truck. If a metal object gets into contact with
a metal object gets into contact with an electrically
an electrically
conductive part, it may cause a short circuit or a serious burn.
conductive part, it may cause a short circuit or a serious burn.
•
•
Always wear prote
Always wear protective glasses a
ctive glasses and protective sh
nd protective shoes when wo
oes when working around
rking around trucks.
trucks.
In particular, wear protective glasses when using a hammer or
In particular, wear protective glasses when using a hammer or sledge on any part of
sledge on any part of
the truck or
the truck or its attachments. Use welder’s gloves, hood/goggl
its attachments. Use welder’s gloves, hood/goggles, apron and other
es, apron and other
protective clothing appropriate to the welding job
protective clothing appropriate to the welding job being performed. Do not wear
being performed. Do not wear
loose fitting or torn clothing.
loose fitting or torn clothing.
3.3
3.3
Work safety
Work safety
•
•
Unauthorize
Unauthorized truck modification is not
d truck modification is not permitted. No modifications or alterations to a
permitted. No modifications or alterations to a
powered industrial truck, which could affect, for example, capacity, stability or safety
powered industrial truck, which could affect, for example, capacity, stability or safety
requiremen
requirements of the
ts of the truck, shall be made without the
truck, shall be made without the prior written approval of the
prior written approval of the
original truck manufacturer, its authorized representative, or a
original truck manufacturer, its authorized representative, or a successor thereof.
successor thereof.
This includes changes affecting, for example, braking, steering, visibility
This includes changes affecting, for example, braking, steering, visibility and the
and the
addition of removable attachments. When the manufacturer or his
addition of removable attachments. When the manufacturer or his successor
successor
approves a modification or alteration, the
approves a modification or alteration, the manufacture
manufacturer or
r or successor shall also
successor shall also
make and approve appropriate changes to the capacity plate, decals, tags and
make and approve appropriate changes to the capacity plate, decals, tags and
operation and maintenance handbooks.
operation and maintenance handbooks.
Only in the event that the
Only in the event that the truck manufacturer is no longer in business and there is
truck manufacturer is no longer in business and there is
no successor in the interest to
no successor in the interest to the business, may the user arrange for a
the business, may the user arrange for a modificatio
modification
n
or alteration to a powered industrial truck, provided, however, that the
or alteration to a powered industrial truck, provided, however, that the user:
user:
a.
a.
arranges
arranges for
for the
the modification
modification or
or alteration
alteration to
to be
be designed,
designed, tested
tested and
and
implemente
implemented by an engineer(s) expert in industrial trucks
d by an engineer(s) expert in industrial trucks and their safety,
and their safety,
b.
b.
maintains
maintains a
a permanent
permanent record
record of
of the
the design,
design, test(s
test(s)
) and
and implementation
implementation of
of the
the
modification or alteration,
modification or alteration,
c.
c.
approves
approves and
and makes
makes appropriate
appropriate changes
changes to
to the
the capacity
capacity plate(s),
plate(s), decals,
decals,
tags and instruction handbook, and
tags and instruction handbook, and
https://www.forkliftpdfmanuals.com/
