© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights reserved.
Revision: B
Revision: B
Document ID: 615023
Document ID: 615023
99 (244)
99 (244)
© Mit
bi hi F klift T
k 2013 All
© Mit
bi hi F klift T
k 2013 All
i ht
d
i ht
d
R
i i
B
R
i i
B
D
t ID 615023
D
t ID 615023
100 (244)
100 (244)
PBV20N2
PBV20N2
Service
Service Manual
Manual
CONNECTION
DESCRIPTION
CONNECTION
DESCRIPTION
C6 DI0 (XA1 C/6)
C6 DI0 (XA1 C/6)
(tiller switch S12)
(tiller switch S12)
Input of the switch DI0. The
Input of the switch DI0. The input is activated when
input is activated when
it is connected to +Batt.
it is connected to +Batt. With the logic hardware
With the logic hardware
properly configured, it can be used to
properly configured, it can be used to supply the EB
supply the EB
and MC positive voltage. The default function
and MC positive voltage. The default function is the
is the
controller TILLER input.
controller TILLER input.
C7 DI2 (XA1 C/7)
C7 DI2 (XA1 C/7)
(side guard in S15 and S16)
(side guard in S15 and S16)
Input of the switch DI7. The
Input of the switch DI7. The input is activated when
input is activated when
it is connected to +Batt. The default function is the
it is connected to +Batt. The default function is the
controller H&S (Hard & Soft) request input. When
controller H&S (Hard & Soft) request input. When
this input is closed, the truck performances are
this input is closed, the truck performances are
modified.
modified.
C8 PPOT
C8 PPOT
(pressure sensor supply B42)
(pressure sensor supply B42)
Potentiometer’s positive supply. The hardware has
Potentiometer’s positive supply. The hardware has
to be configured to the 12 V or +5 V.
to be configured to the 12 V or +5 V.
C9 CPOTL
C9 CPOTL
(pressure sensor output B42)
(pressure sensor output B42)
Lift/lower potentiometer wiper input.
Lift/lower potentiometer wiper input.
C10 CANL (XA1 C/10)
C10 CANL (XA1 C/10)
(CAB bus green)
(CAB bus green)
Low level CAN bus voltage I/O.
Low level CAN bus voltage I/O.
8.2.3.4
8.2.3.4 CND
CND external
external connector
connector
CONNECTION
DESCRIPTION
CONNECTION
DESCRIPTION
D1 ENC A (XA1 D/1)
D1 ENC A (XA1 D/1)
(traction motor encoder phase A M1)
(traction motor encoder phase A M1)
Traction motor encoder phase A.
Traction motor encoder phase A.
D2 PENC (XA1 D/2)
D2 PENC (XA1 D/2)
(traction motor encoder supply M1)
(traction motor encoder supply M1)
Encoder positive supply. The hardware has to be
Encoder positive supply. The hardware has to be
configured to the 12 V or +5 V.
configured to the 12 V or +5 V.
D3 PTHERM (XA1 D/3)
D3 PTHERM (XA1 D/3)
(temperature sensor R31)
(temperature sensor R31)
Traction motor’s thermal sensor positive input
Traction motor’s thermal sensor positive input
5VDC. The resistance of the sensor is 581
5VDC. The resistance of the sensor is 581
Ω at
Ω at
20
20
˚C.
˚C.
D4 ENC B (XA1 D/4)
D4 ENC B (XA1 D/4)
(traction motor encoder phase B M1)
(traction motor encoder phase B M1)
Traction motor encoder phase B.
Traction motor encoder phase B.
D5 NENC XA1 D/4)
D5 NENC XA1 D/4)
(traction motor encoder gnd M1)
(traction motor encoder gnd M1)
Negative of the encoder.
Negative of the encoder.
D6 NTHERM (XA1 D/6)
D6 NTHERM (XA1 D/6)
(temperature sensor R31)
(temperature sensor R31)
Negative (GND) for the motor thermal sensor.
Negative (GND) for the motor thermal sensor.
https://www.forkliftpdfmanuals.com/
